During the process of motorcycle restoration, you will be faced with various challenges. The most important problem that you are likely to encounter includes finding the various surface finish for different parts with motorcycle paint colors. Deciding on which part to paint or not to paint is another major challenge, whether plated, painted or powder coated. The decision will tone down to the cost or the reliability of the component.
As the owner of the motorcycle, you will have to decide on whether to have a frame powder coated instead of painting. When the major consideration is for costs then it is affordable to paint the frame by yourself.
There are various mounting brackets which you can access for your old bike. You can access the different parts for your old bike for batteries, horns and seats.. During the restoration process, the total costs incurred can be lowered through painting small items yourself.
There are various auto stores which stock a broad range of spray paints which can be accessed through pressurized cans. There are limited stock when it comes to different types of paints, but you can access various part of brackets.
The main concept behind getting a good final finish is through the preparation phase as recommended by various painting experts. The amount of work that is needed for applying the final paint finish is little compared to the preparation needed. You should start by cleaning your bike. You can simplify the method by taking pictures of the different parts as you disassemble.
During the preparation phase of spraying a component, you should wear the latex gloves. The latex gloves will consequently protect your hands from the different parts of the natural greases and oils from your skin. The spray can cause irritations when in contact with your skin.
The first step towards cleaning the different parts of your bike should make use of a degreasing tank. At this stage, you should consider using a brake cleaner which guarantees that no residues will be left behind.
In case your component has rust or old paint, you can using grit basting. You should wire brush the different items using a dry paper. You can blast the different components using baking soda which is less aggressive.
Before applying the filler material, you should consider spraying the area with a primer especially an etching primer. You can also prefer to powder coat the components to seal the components before application of any filler material.
Painting is the final process for applying topcoat. You should be conversant with the various rules which surround spray painting. You can take up practicing on scrap material which resembles the similar composition of the components which you want to paint.